Paint calculator: work out wall paint and primer
Work out wall paint: enter the room dimensions – litres, suitable tins, primer and masking material, with doors and windows deducted.
In short Example (Room 4.50 × 3.60 × 2.60 m · 1 door, 1 window · 2 coats): Wall paint 15 l, 1 × 10 l + 1 × 5 l · 13.77 l needed. Rule: (wall area + ceiling) × coats ÷ coverage gives the litres of paint.
An example step by step
Room 4.50 × 3.60 × 2.60 m · 1 door, 1 window · 2 coats
- 1Wall area2 × (4.50 + 3.60) × 2.60 − 3.24 m² openings = 38.88 m²
- 2Ceiling4.50 × 3.60 = 16.20 m²
- 3Total area38.88 m² + 16.20 m² (ceiling) = 55.08 m²
- 4Paint55.08 m² × 2 coats ÷ 8 m²/l = 13.77 l
- 5Tin sizessmallest tin combination ≥ 13.77 l: 1 × 10 l + 1 × 5 l = 15 l (1.23 l left over)
- 6Stabilising primer55.08 m² ÷ 10 m²/l = 5.51 l → 6 l
- 7Masking tape16.20 m × 2 + openings 10.60 m = 43.00 m → 1 roll of 50 m
- 8Dust sheet16.20 m² × 1.1 = 17.82 m² → 1 pc of 20 m²
- Result: 15 l
How we calculate
Wall area = perimeter × room height − openings. Total area = wall area + ceiling (if the ceiling is painted too).
Amount of paint = total area × coats ÷ coverage (m² per litre per coat).
Pack sizes: from 2.5 · 5 · 10 · 12.5 l, the calculator picks the combination with the least surplus paint and, if tied, the fewest tins.
Primer = total area ÷ 10 m²/l, rounded up to whole litres. Masking tape = perimeter × 2 plus the perimeter of the openings. Dust sheet = floor area × 1.1.
Wall paint: how many m² does a tin cover?
The table turns the calculation around: it shows what area (wall plus ceiling) a tin covers at a coverage of 8 m² per litre, depending on the number of coats.
| Pack size | 1 coat | 2 coats | 3 coats |
|---|---|---|---|
| 2,5 l | 20 m² | 10 m² | 6.7 m² |
| 5 l | 40 m² | 20 m² | 13.3 m² |
| 10 l | 80 m² | 40 m² | 26.7 m² |
| 12,5 l | 100 m² | 50 m² | 33.3 m² |
Formula: litres × coverage ÷ coats. The coverage is on the tin (usually 7 to 9 m² per litre) and can be changed in the calculator; absorbent surfaces need more.
Paint calculator app
Works out wall paint, primer or wallpaper rolls – minus doors and windows. In the browser you calculate one room – in the app whole homes, with a PDF for your customers.
- Projects & rooms
- PDF with logo
- Your own defaults
- Offline, no account
Common questions
How much paint do I need per m²?
It is given as coverage on the tin, usually 7 to 9 m² per litre per coat. At 8 m²/l and two coats you need roughly 0.25 litres per m² of wall.
How many coats make sense?
Usually two. One coat is often enough when repainting in the same colour with a paint that covers well. For a strong colour change or an absorbent surface, plan for three coats.
When and how much deep penetrating primer do I need?
Deep penetrating primer stabilises absorbent or powdery surfaces. The calculator uses 10 m² per litre for one coat and rounds up to whole litres. Check the figure on the tin.
Why does the calculator show more paint than I need?
Paint only comes in fixed pack sizes. The calculator picks the combination with the smallest surplus and shows the actual amount needed underneath.
Are doors and windows deducted?
Yes. Every opening you enter is deducted from the wall area. Reveals are not included and are covered by the reserve.
What does the tin combination mean?
The calculator picks, from pack sizes of 2.5 · 5 · 10 · 12.5 l, the combination with the smallest surplus, and on a tie the one with fewer tins.
How many m² does a 10 l tin of wall paint cover?
At a coverage of 8 m² per litre, a 10 l tin paints 80 m² in one coat, 40 m² in two coats (wall plus ceiling). The coverage is on the tin.
How far does 2.5 l of wall paint go?
At 8 m² per litre and two coats, 2.5 l covers 10 m²; with one coat it is 20 m². A 5 l tin doubles the area.