Roof calculator: work out roof area, pitch, rafters and tiles
Enter a few dimensions – roof area, pitch, rafters, tiles and battens appear instantly.
In short Example (Gable roof · h 2.70 m, b 4.50 m · Eaves length 10 m): Roof tiles 1,179 tiles, Roof area 114.96 m² · 9.95 tiles/m². Rule: pitch = arctan(h ÷ b), rafter length = √(h² + b²) + overhang.
An example step by step
Gable roof · h 2.70 m, b 4.50 m · Eaves length 10 m
- 1Pitchα = arctan(2.70 ÷ 4.50) = 30.96° = 60.0%
- 2Rafter length√(2.70² + 4.50²) + 0.50 m = 5.248 m + 0.50 m = 5.748 m
- 3Roof area5.748 m × 10.00 m × 2 = 114.96 m²
- 4Tiles9.95 pcs/m² × 114.96 m² × (1 + 3%) = 1,178.2 → 1,179 pcs
- 5Tiling battens19 rows × 10.00 m × 2 = 380.00 m → × (1 + 10%) = 418.00 m
- 6Rafters10.00 m ÷ 0.80 m = 12.5 → rounded up to 13 bays → 14 rafters per side → 28 pcs, actual spacing 77 cm
- 7Counter battens28 × 5.748 m = 160.94 m
- 8Ridge tilesround up(10.00 m × 2.5) = 25 pcs
- Result: 1,179 tiles
How we calculate
Pitch α = arctan(h ÷ b); in per cent = h ÷ b × 100. If you enter degrees or per cent, h is calculated from them.
Rafter length = √(h² + b²) + overhang. Roof area = rafter length × eaves length × number of slopes (2 for a gable roof, 1 for a mono-pitch roof).
Tiles = 1 ÷ (batten gauge × cover width) per m², times the roof area, plus a 3% allowance, rounded up.
Batten rows per side = rafter length ÷ batten gauge, rounded up, plus 1. Tiling battens = rows × eaves length × sides plus 10% wastage. Rafters per side = eaves length ÷ rafter spacing, rounded down, plus 1. Counter battens = rafters × rafter length. Ridge tiles = eaves length × 2.5 (gable roof only).
Roof pitch in degrees and per cent, roof area from the plan area
With the factor 1 ÷ cos α you convert the plan area of the roof into roof area (without overhang). The table also shows the pitch in degrees and per cent.
| Pitch | Per cent | Roof area factor | Roof area at 100 m² plan area |
|---|---|---|---|
| 15° | 26.8 % | 1.035 | 103.5 m² |
| 20° | 36.4 % | 1.064 | 106.4 m² |
| 25° | 46.6 % | 1.103 | 110.3 m² |
| 30° | 57.7 % | 1.155 | 115.5 m² |
| 35° | 70.0 % | 1.221 | 122.1 m² |
| 40° | 83.9 % | 1.305 | 130.5 m² |
| 45° | 100.0 % | 1.414 | 141.4 m² |
Roof area = plan area × 1 ÷ cos α. Overhang, roof windows and dormers are added in the calculator. This applies to gable and mono-pitch roofs with the same pitch on all slopes.
Roof calculator app
Works out roof pitch, rafters, tiles and battens from a few dimensions. In the browser you calculate one roof area – in the app several roof areas and buildings, with a PDF for your customers.
- Projects & rooms
- PDF with logo
- Your own defaults
- Offline, no account
Common questions
How do I calculate the roof pitch?
Divide the height h (ridge above eaves) by the horizontal width b. The arctangent gives the angle in degrees. In the example: arctan(3 ÷ 5) = 30.96°, which is 60%.
How long is a rafter?
The length along the roof slope is √(h² + b²) plus overhang. In the example that is 5.83 m + 0.50 m = 6.33 m.
How many roof tiles do I need per m²?
It follows from the batten gauge: 1 ÷ (batten gauge × cover width). At 33.5 × 30 cm that is around 9.95 tiles per m². The batten gauge is in the manufacturer’s data sheet.
Why an allowance for the tiles?
For breakage and cutting the calculator adds 3% by default. You can change the value under ‘Advanced’.
Does this also apply to hipped roofs?
No. The calculator handles gable and mono-pitch roofs. Hipped roofs, roof windows and calculations of snow or wind load are not included.
What is the batten gauge?
The visible dimension of the laid tile in the direction of the slope. It is in the data sheet and equals the batten spacing.
Are ridge tiles included?
Yes, for a gable roof along the eaves length. Verge tiles and ventilation tiles are extra.
Does the calculator work out the structure?
No. Rafter cross-section and structural design are determined by the carpenter or structural engineer.
How many m² of roof area does my roof have at 100 m² plan area?
It depends on the pitch: roof area = plan area ÷ cos α. At 30° it is 115.5 m², at 35° 122.1 m² and at 45° 141.4 m² (without overhang).
How many roof tiles do I need for 100 m² of roof area?
With a cover size of 33.5 × 30 cm it is 9.95 pieces per m², with a 3% allowance 1,025 tiles for 100 m².