Roof calculator Get the appApp
Roof calculator app – free. Pro features (saving rooms, PDF with your logo, whole homes) one-off for £4.99.Get it free

Roof pitch calculator: degrees and per cent from height and width

Enter degrees, per cent or height and width – the other values appear instantly.

In short With h = 2.50 m and b = 5.00 m the roof pitch is 26.57° / 50.0% (arctan(2.5 ÷ 5) = 26.57°, which is 50.0%) – Roof pitch: 26.57. Calculation steps: Pitch, α = arctan(2.50 ÷ 5.00) = 26.57° = 50.0%.

An example step by step

With h = 2.50 m and b = 5.00 m the roof pitch is 26.57° / 50.0% (arctan(2.5 ÷ 5) = 26.57°, which is 50.0%).

  1. 1
    Pitchα = arctan(2.50 ÷ 5.00) = 26.57° = 50.0%
  2. 2
    Rafter length√(2.50² + 5.00²) + 0.50 m = 5.590 m + 0.50 m = 6.090 m
  3. 3
    Roof area6.090 m × 12.00 m × 2 = 146.16 m²
  4. 4
    Tiles9.95 pcs/m² × 146.16 m² × (1 + 3%) = 1,498.0 → 1,499 pcs
  5. 5
    Tiling battens20 rows × 12.00 m × 2 = 480.00 m → × (1 + 10%) = 528.00 m
  6. 6
    Rafters12.00 m ÷ 0.80 m = 15 → rounded up to 15 bays → 16 rafters per side → 32 pcs, actual spacing 80 cm
  7. 7
    Counter battens32 × 6.090 m = 194.89 m
  8. 8
    Ridge tilesround up(12.00 m × 2.5) = 30 pcs
  9. Result: Roof pitch: 26.57

How many cm are 3, 5, 7 or 10 degrees?

Per cent and centimetres per metre are the same thing: a pitch of 8.7% means 8.7 cm of height difference over 1 m of horizontal length. The table shows small angles as found on flat and mono-pitch roofs.

Roof pitch in degrees, per cent and height difference in cm per 1 m, 3 m and 5 m of length
PitchPer centcm per 1 mcm per 3 mcm per 5 m
2°3.5 %3.5 cm10.5 cm17.5 cm
3°5.2 %5.2 cm15.7 cm26.2 cm
5°8.7 %8.7 cm26.2 cm43.7 cm
7°12.3 %12.3 cm36.8 cm61.4 cm
10°17.6 %17.6 cm52.9 cm88.2 cm
15°26.8 %26.8 cm80.4 cm134.0 cm

Formula: height = length × tan α. The length is measured horizontally, not along the roof slope. To find the pitch from height and width, use the calculator above.

The calculator app

Roof calculator app

Works out roof pitch, rafters, tiles and battens from a few dimensions. In the browser you calculate one roof area – in the app several roof areas and buildings, with a PDF for your customers.

  • Projects & rooms
  • PDF with logo
  • Your own defaults
  • Offline, no account
FreeGet the app free · Pro features one-off for £4.99, no subscription
Coming soon on theApp StoreGet it onGoogle Play
The app is free and calculates fully without Pro. Pro unlocks saving, projects and PDF.

Common questions

How do I calculate the roof pitch?

Divide the height h (ridge above eaves) by the horizontal width b and take the arctangent. In the example: arctan(2.5 ÷ 5) = 26.57°. In per cent it is h ÷ b × 100 = 50.0%.

How do I convert degrees to per cent?

Per cent = tan(degrees) × 100. At 45° that is 100%, at 30° around 57.7%. Conversely, 100% gives exactly 45°. For this, choose input in degrees or per cent in the calculator.

What is the minimum roof pitch?

The minimum roof pitch is the lowest pitch at which a roof covering is rainproof under the applicable trade rules without additional measures. It depends on the material and the manufacturer’s data. The calculator does not know it; under ‘Advanced’ you can enter a minimum pitch and will then get a warning if the pitch falls below it.

Which width b do I enter?

The horizontal distance from the eaves to below the ridge, i.e. half the building width for a symmetrical gable roof. The overhang does not count.

Does the calculator also check the structure?

No. The calculator provides pitch and quantities as guide values. Load-bearing capacity, rafter cross-section and snow and wind load are checked by a structural engineer or carpenter.

How many cm is a 5-degree roof pitch?

5 degrees is a pitch of 8.7%, i.e. 8.7 cm of height difference over 1 m of horizontal length. At 3° it is 5.2 cm, at 7° 12.3 cm and at 10° 17.6 cm per metre.

How many degrees is a 10 per cent pitch?

A 10% pitch is arctan(0.10) = 5.71°. The reverse: 17.6% corresponds to 10°.