Roof calculator Get the appApp
Roof calculator app – free. Pro features (saving rooms, PDF with your logo, whole homes) one-off for £4.99.Get it free

Roof area calculator: m² for gable and mono-pitch roofs

Enter the roof shape, pitch (degrees, per cent or height), width, overhang and eaves length – the calculator gives the roof area in m² and shows the calculation step by step.

In short With a 35° pitch, b = 5.00 m (half the building width), 0.50 m overhang and 10 m eaves length, the gable roof has a roof area of 132.08 m² (rafter length 6.604 m × 10 m × 2 sides) – Roof area: 132.08. Calculation steps: Pitch, α = 35.00° = 70.0%.

An example step by step

With a 35° pitch, b = 5.00 m (half the building width), 0.50 m overhang and 10 m eaves length, the gable roof has a roof area of 132.08 m² (rafter length 6.604 m × 10 m × 2 sides).

  1. 1
    Pitchα = 35.00° = 70.0%
  2. 2
    Rafter length√(3.50² + 5.00²) + 0.50 m = 6.104 m + 0.50 m = 6.604 m
  3. 3
    Roof area6.604 m × 10.00 m × 2 = 132.08 m²
  4. 4
    Tiles9.95 pcs/m² × 132.08 m² × (1 + 3%) = 1,353.6 → 1,354 pcs
  5. 5
    Tiling battens21 rows × 10.00 m × 2 = 420.00 m → × (1 + 10%) = 462.00 m
  6. 6
    Rafters10.00 m ÷ 0.80 m = 12.5 → rounded up to 13 bays → 14 rafters per side → 28 pcs, actual spacing 77 cm
  7. 7
    Counter battens28 × 6.604 m = 184.91 m
  8. 8
    Ridge tilesround up(10.00 m × 2.5) = 25 pcs
  9. Result: Roof area: 132.08

How we calculate

The roof area of one side is its rafter length times the eaves length. The rafter length follows from Pythagoras’ theorem: height h and horizontal width b give the length along the slope, plus the eaves overhang. The gable roof has two sides, the mono-pitch roof one.

Rafter length = √(h² + b²) + overhang

Roof area = rafter length × eaves length × number of sides

If you only know the pitch, the calculator works out the height itself: h = b × tan α, for a percentage h = b × percentage ÷ 100. The width b is the horizontal distance from the eaves to below the ridge, for a symmetrical gable roof half the building width; the overhang does not count.

As a rule of thumb without overhang, roof area ≈ plan area ÷ cos α. The table shows the factor 1 ÷ cos α for common pitches.

Factor: roof area from plan area

Rule of thumb without overhang: roof area = plan area ÷ cos α. Example for 100 m² of plan area.

PitchPer centFactor 1 ÷ cos αRoof area for 100 m² plan area
20°36.4 %1.064106.42 m²
25°46.6 %1.103110.34 m²
30°57.7 %1.155115.47 m²
35°70.0 %1.221122.08 m²
40°83.9 %1.305130.54 m²
45°100.0 %1.414141.42 m²

Example: gable roof by pitch

Gable roof with b = 5.00 m, 0.50 m overhang and 10 m eaves length (two sides), calculated with the calculator.

PitchRafter lengthRoof area
20°5.821 m116.42 m²
30°6.274 m125.47 m²
35°6.604 m132.08 m²
45°7.571 m151.42 m²
Full calculatorRoof calculatorGo to Roof calculator
The calculator app

Roof calculator app

Works out roof pitch, rafters, tiles and battens from a few dimensions. In the browser you calculate one roof area – in the app several roof areas and buildings, with a PDF for your customers.

  • Projects & rooms
  • PDF with logo
  • Your own defaults
  • Offline, no account
FreeGet the app free · Pro features one-off for £4.99, no subscription
Coming soon on theApp StoreGet it onGoogle Play
The app is free and calculates fully without Pro. Pro unlocks saving, projects and PDF.

Common questions

How do I calculate the roof area?

Rafter length × eaves length × number of roof sides. The rafter length is √(h² + b²) + overhang. In the example: 6.604 m × 10 m × 2 = 132.08 m².

How do I calculate the roof area from the plan area?

Rule of thumb: roof area ≈ plan area ÷ cos α, without overhang. At 35° the factor is 1.221: 100 m² of plan area gives around 122 m² of roof area. The calculator is more precise because it includes the overhang.

Which width b do I enter?

The horizontal distance from the eaves to below the ridge. For a symmetrical gable roof this is half the building width, for a mono-pitch roof the whole building depth. The overhang is added separately.

What is different about a mono-pitch roof?

A mono-pitch roof has only one side. With the same dimensions the area is halved: in the example 66.04 m² instead of 132.08 m². For b, enter the whole horizontal depth.

Does the calculator also handle hipped roofs, dormers and roof windows?

No. The calculator handles gable and mono-pitch roofs. For hipped roofs, dormers and roof windows, calculate the partial areas individually and add them up, or have a roofer take measurements.

How accurate is the result?

It is a guide value for planning and material quantities, not a survey. The roof calculator works out tiles, battens and rafters from the same area. Load-bearing capacity and snow and wind load are checked by a structural engineer or carpenter.